SKU
RXSOL-20-2007-020
Title
HCF Remover Neutral
Title
HCF Remover Neutral
Product Description
RXSOL HCF Remover is a heavy-duty, low-foaming marine tank cleaning chemical specially developed for removing hydrocarbon residues, baked-on drying oils, animal and vegetable oils, fish oils, grease, wax, sludge and other stubborn organic deposits.
Its blend of surfactants, wetting agents and cleaning solvents helps penetrate and loosen difficult residues, allowing effective removal through tank cleaning machines, circulation systems and spray washing.
The product is particularly useful when preparing cargo tanks for subsequent cargoes where residual hydrocarbon contamination must be minimized.
Especially formulated to soften up / remove baked on drying oils and also used after animal and vegetable oils, fish oils, tall oils,tug oil etc. It is low toxic product with an exceptional solvency power on soil & oily matter .It is free from hydrocarbon solvents and minimizes the extreme hazards to personnel in handling materials.
RXSOL-20-2007-025 is a very strong low foaming cleaner.
Tank Lining– Stainless / Epoxy / Phenolic / Zinc-silicate coatings and from most metal surfaces (ferrous alloys, tin, zinc, aluminum and galvanized surfaces).
Product Remarks
Remarks
Neutral Hcf supplier in India, UAE. We are manufacturer and supplier of HCF Remover Neutral in Dubai, Sharjah, Fujairah, Kandla, Mumbail, Manglore, Mundra, Sikka, Visakhapatnam, Goa, Chennai, Kolkata, Ennore, Paradip.
Precaution ::: Beforre using of this product, Ask for MSDS of HCF Remover Neutral
Tag Identification
Tag Identification
FAQs — Hydrocarbon Remover HCF Remover1) What is Hydrocarbon Remover used for?A powerful, low-foaming cleaner formulated to soften and remove baked-on drying oils. Ideal for cleaning after handling animal and vegetable oils, fish oils, tall oils, tung oil, and similar residues. 2) Is it safe for personnel?Yes. It is low in toxicity, free from hydrocarbon solvents, and minimizes hazards during handling. Standard PPE such as gloves and goggles is still recommended. 3) How effective is it on stubborn residues?It has exceptional solvency power on soils and oily matter, making it effective even on hardened or baked-on deposits. 4) Is it suitable for all industries?Yes. While widely used in marine cleaning, it is also effective in food processing, oil handling, and industrial maintenance where oils and greasy residues are present. 5) Does it contain hydrocarbon solvents?No. It is completely free from hydrocarbon solvents, making it safer for the environment and personnel. |
Field Note
Note
Characteristics: -
- Removes grease, oil, carbon deposits, soil and grime.
- Keeps loosened deposits in suspension preventing re-deposition.
- Low toxic. , Non-flammable.
- Free from hydrocarbon solvents.
- Effective and economical in use , Water-based cleaner.
- RXSOL-20-2007-HCF has numerous cleaning applications including removal of greases, waxes, oil, sludge, soot, carbon deposits and general dirt and grime.
- Non-corrosive to ferrous metals. Suitable for all tank-coatings.
- Can be used for gas and hydrocarbon freeing of tanks.
- Can be used for deodorizing
-
Contains wetting agents.
Technical Specifications
Typical Technical Properties
|
Parameter |
Published / Indicative Value |
|---|---|
|
Appearance |
Clear to yellowish liquid |
|
pH |
Above 7 |
|
Specific Gravity at 20°C |
Approx. 1.01 |
|
Water Miscibility |
Fully miscible |
|
Foaming |
Low |
|
Cleaning Chemistry |
Non-ionic surfactants and glycol ethers |
RXSOL – Manufacturer & Supplier of Tank Cleaner
Characteristics: -
- Removes grease, oil, carbon deposits, soil and grime.
- Keeps loosened deposits in suspension preventing re-deposition.
- Low toxic. , Non-flammable.
- Free from hydrocarbon solvents.
- Effective and economical in use , Water-based cleaner.
- RXSOL-20-2007-025 has numerous cleaning applications including removal of greases, waxes, oil, sludge, soot, carbon deposits and general dirt and grime.
- Non-corrosive to ferrous metals. Suitable for all tank-coatings.
- Can be used for gas and hydrocarbon freeing of tanks.
- Can be used for deodorizing
-
Contains wetting agents.
Note:- Completely miscible with sea water.
Application
Applications
-
Cargo tank cleaning after petroleum and chemical cargoes.
-
Removal of animal oils, vegetable oils, fish oils and tall oil residues.
-
Cleaning tanks contaminated with grease, wax and oily sludge.
-
Removal of soot, carbon deposits and general grime.
-
Cleaning of stainless steel and compatible coated cargo tanks.
-
Final cleaning stages before hydrocarbon-sensitive cargoes.
First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using RXSOL-20-2007-025 is by direct injection followed by recirculation washing, using tank cleaning machines.
Industrial Area
Key Features
-
Strong oil and grease removal.
-
Low-foaming formulation for recirculation systems.
-
Water-based cleaning chemistry.
-
Miscible with fresh water and seawater.
-
Helps suspend loosened contaminants to reduce redeposition.
-
Suitable for selected epoxy, phenolic and zinc-silicate tank coatings, subject to coating approval.
Dose
Recommended Cleaning Procedure
1. Initial Washing: Flush cargo tanks with cold water to remove loose residues and reduce the risk of polymerization of drying oils.
2. Chemical Cleaning: Prepare an appropriate dilution of RXSOL HCF Remover according to the cargo residue, tank coating and approved cleaning procedure.
3. Recirculation: Circulate through tank cleaning machines, ensuring suitable filtration or straining.
4. Spot Cleaning: For persistent residues, apply the cleaner directly and allow approximately 10–45 minutes of contact without letting it dry.
5. Final Rinsing: Wash thoroughly with fresh water, inspect the tank and confirm that residues and foam have been removed.
The published application instructions also describe warm-water washing at approximately 60°C for suitable systems. Temperature limits must be checked against tank coating specifications.
RXSOL TANK CLEANER
Using-Procedure:-First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using RXSOL-20-2007-020 is by direct injection followed by recirculation washing, using tank cleaning machines.
Spraying Method:-Using HCF as delivered in drums, spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), then butterworth at maximum pressure and warm water 60oC for at least 3 hours, checking that there is no foam remaining in the final stages. Inspects tanks(s) and if desired result has been achieved fresh water rinse and dry.
** Make sure to take all safety precautions are followed when handling / spraying HCF **
Injection Method:– Not applicable.
Re-circulation Method:–Fill tank with fresh water and heat up to warm 50oC . IF a drop line is available on the tank line system, then start to circulate the water and add the required amount of Caustic flakes and HCF to make a 2.5% solution. A stronger solution can be made, but be advised that too much Caustic and too high temperature will result in white powder all over the tank. Under normal circumstances, between 2.5% and 4.5% will be sufficient strength. If there is no drop line, then lower butterworth hoses into the tank from the pump stack header without machines attached and circulate through these hoses while you fill the solution material.
**Use a strainer at the pump stack when circulating any solution.**
Tank Lining– Stainless / Epoxy / Phenolic / Zinc-silicate.
Note:- Completely miscible with sea water.Using-Procedure:-First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using RXSOL-20-2007-020 is by direct injection followed by recirculation washing, using tank cleaning machines.
Spraying Method:-Using HCF as delivered in drums, spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), then butterworth at maximum pressure and warm water 60oC for at least 3 hours, checking that there is no foam remaining in the final stages. Inspects tanks(s) and if desired result has been achieved fresh water rinse and dry.
** Make sure to take all safety precautions are followed when handling / spraying HCF **
Injection Method:– Not applicable.
Re-circulation Method:–Fill tank with fresh water and heat up to warm 50oC . IF a drop line is available on the tank line system, then start to circulate the water and add the required amount of Caustic flakes and HCF to make a 2.5% solution. A stronger solution can be made, but be advised that too much Caustic and too high temperature will result in white powder all over the tank. Under normal circumstances, between 2.5% and 4.5% will be sufficient strength. If there is no drop line, then lower butterworth hoses into the tank from the pump stack header without machines attached and circulate through these hoses while you fill the solution material.
**Use a strainer at the pump stack when circulating any solution.**
Tank Lining– Stainless / Epoxy / Phenolic / Zinc-silicate.
Characteristics: -
- Removes grease, oil, carbon deposits, soil and grime.
- Keeps loosened deposits in suspension preventing re-deposition.
- Low toxic. , Non-flammable.
- Free from hydrocarbon solvents.
- Effective and economical in use , Water-based cleaner.
- RXSOL-20-2007-HCF has numerous cleaning applications including removal of greases, waxes, oil, sludge, soot, carbon deposits and general dirt and grime.
- Non-corrosive to ferrous metals. Suitable for all tank-coatings.
- Can be used for gas and hydrocarbon freeing of tanks.
- Can be used for deodorizing
-
Contains wetting agents.
Note:- Completely miscible with sea water.
Using-Procedure:-First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using RXSOL-20-2007-020 is by direct injection followed by recirculation washing, using tank cleaning machines.
Spraying Method:-Using HCF as delivered in drums, spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), then butterworth at maximum pressure and warm water 60oC for at least 3 hours, checking that there is no foam remaining in the final stages. Inspects tanks(s) and if desired result has been achieved fresh water rinse and dry.
** Make sure to take all safety precautions are followed when handling / spraying HCF **
Injection Method:– Not applicable.
Re-circulation Method:–Fill tank with fresh water and heat up to warm 50oC . IF a drop line is available on the tank line system, then start to circulate the water and add the required amount of Caustic flakes and HCF to make a 2.5% solution. A stronger solution can be made, but be advised that too much Caustic and too high temperature will result in white powder all over the tank. Under normal circumstances, between 2.5% and 4.5% will be sufficient strength. If there is no drop line, then lower butterworth hoses into the tank from the pump stack header without machines attached and circulate through these hoses while you fill the solution material.
**Use a strainer at the pump stack when circulating any solution.**
Tank Lining– Stainless / Epoxy / Phenolic / Zinc-silicate.
Characteristics: -
- Removes grease, oil, carbon deposits, soil and grime.
- Keeps loosened deposits in suspension preventing re-deposition.
- Low toxic. , Non-flammable.
- Free from hydrocarbon solvents.
- Effective and economical in use , Water-based cleaner.
- RXSOL-20-2007-HCF has numerous cleaning applications including removal of greases, waxes, oil, sludge, soot, carbon deposits and general dirt and grime.
- Non-corrosive to ferrous metals. Suitable for all tank-coatings.
- Can be used for gas and hydrocarbon freeing of tanks.
- Can be used for deodorizing
-
Contains wetting agents.
Note:- Completely miscible with sea water.
Useful Area
RXSOL HCF REMOVER
Hydrocarbon-Free Tank Cleaning Chemical | Marine & Industrial Degreaser
Product Name: HCF Remover Neutral
Product Code: RXSOL-20-2007-020
Brand: RXSOL
Category: Marine Tank Cleaning Chemicals
Type: Water-based, low-foaming detergent and degreaser
Product details verified against published RXSOL listings.
RXSOL – Manufacturer & Supplier of Hydrocarbon-Free Tank Cleaning Chemical | Marine & Industrial Degreaser
Locations
RXSOL HCF Remover | Hydrocarbon-Free Marine Tank Cleaning Chemical Manufacturer
RXSOL HCF Remover is a powerful low-foaming marine tank cleaning chemical for removing hydrocarbon residues, animal oils, vegetable oils, grease and sludge. Supplier in India, UAE and Oman.
Tank Cleaning Chemical Manufacturer and supplier in Mumbai, Kandla, Mundra, Kolkata, Chennai, Visakhapatnam, Fujairah, Dubai, Sharjah, Abu Dhabi, Muscat and Sohar.
HCF Remover is a cleaning chemical, not a guarantee that a tank is hydrocarbon-free or gas-free. Tank acceptance requires appropriate inspection and testing. Follow the current SDS, coating compatibility requirements, enclosed-space entry procedures and applicable wash-water disposal regulations.
HCF Remover Neutral manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of HCF Remover Neutral at a competitive price from us. We have ready stock of HCF Remover Neutral in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
