Descalex Polymer Heat Exchanger

Descalex Polymer Heat Exchanger
Request a Quote
SKU
RXSOL-40-1048-025

Title
Descalex Polymer Heat Exchanger

Scales are very damaging to the boiler because they interfere with the heat transfer and can lead to overheating and eventually, boiler rupture , To increas usable life of cleaned equipment , it is safe and effective way to remove scale deposits from all types of water-cooled and water-heated equipment. This descaler specifically formulated and developed to rapidly clean mineral scale from passages in water-cooled or heated equipment. It improves Plant Efficiency, Lowers Cost, Conserves Energy, Decreases Down-Time.

Chemically react with and decompose Calcium, Magnesium deposited Salts. Suitable for pipeline, boiler, HVAC, Heat Exhanger, Condenser, Evapourator, Chiller, Compressor and etc.     Specifically formulated to remove rust and water scale build up from boiler evaporators, heat exchangers, cooling systems, pipeline collection system etc. Highly effective on heating. Safe and easy handling and storage . Fast and effctive scale remover .

-   Non-combustible
-   Smoke from fires is irritating
-   Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions
-   Prevent run off water from entering drains if possible
-   Non-poisonous ::: It does not contain toxic cresols or other tar oils that Require SARA Title III, Section 313 spill loss or disposal.
Non-polluting, Non-corrosive.

Uniqueness of RXSOL-40-1048-025 ::: --- 
RXSOL-40-1048-025  Descaler has the ability to dissolve approximately 1.5kg of calcium carbonate scale per gallon in concentrated form. It does not need to be heated up during cleaning. The uniqueness of this Descaler allows you to clean some equipment while still in operation utilizing a minimum of your own personnel.

Category
Scale Remover-11

Product Remarks

Remarks

<p style="text-align: justify">
RXSOL-40-1048-025 should not be used on Aluminium, Zinc, Tin, or any Galvanized Surfaces for which a special grade cleaner should be used. Chemical Cleaning Module Rx cleansers has developed a 280 litres capacity cleaning module, primarily designed for use with chemical acid solvents for descaling boilers, calorifiers, heat exchangers & other types of equipment where rust & scale form RXSOL-11-1008--DC Boilers, See Rx cleansers Practical Application Manual.</p>
<p>
Formation of Calcium Sulfate is main cause for SCALE formation :::</p>
<p style="text-align: justify;">
The principal problem potential posed by sulfate ions in water is the possibility of calcium sulfate scale formation.  Precipitation of calcium sulfate can occur when high concentrations of both calcium and sulfate exist simultaneously.  There are three primary areas of water treatment in which calcium sulfate precipitation may occur boilers, cooling systems, and ion exchangers operating in the hydrogen or acid mode.</p>
<p style="text-align: justify;">
In boilers, calcium sulfate scale formation has been reduced to a minimum by modern treatment practices.  The low hardness levels largely preclude calcium sulfate boiler scale.    By contrast, cooling systems are subject to calcium sulfate scale deposition because the makeup is usually not treated for hardness removal.  Cooling water is usually treated with sulfuric acid for pH control, and the makeup is cycled, i.e. concentrated.  Calcium sulfate scale deposition can  result unless the cycles of concentration are properly controlled in conjunction with the proper use of scale control chemicals.  Cation ion exchangers regenerated with sulfuric acid also can pose a major calcium sulfate problem. Calcium sulfate precipitation can be avoided by controlling the acid concentration and the flow rate through the exchanger.  </p>
<p style="text-align: justify;">
<a href="http://rxmarine.com/SULFATE-TEST-KIT">Sulfate content can be calculated in Laboratory by using this method</a> ::: http://rxmarine.com/SULFATE-TEST-KIT</p&gt;

Tag Identification

Tag Identification

<p>
#ScaleRemover_Dubai</p>

Field Note

Note

<p>
 </p>
<p>
•<span style="background-color: #ffff00"> </span><strong><span style="background-color: #ffff00">Automotive </span></strong>- Closed Circuit Cooling, Dynamometers, Extruders, Molders, Radiators, Welders</p>
<p>
• <strong><span style="background-color: #00ff00">Bottling </span></strong>- CO2 Generators, Heaters, Exchangers, Rinse Tanks, Sterilizers, Washers</p>
<p>
<strong><span style="font-size: 16px">.</span> HOUSE HOLD</strong> - <font size="2">Dissolves hard and old lime scale deposits from your appliances. It extends the life of the appliance and saves running cost. It can be used in appliances such as Washing Machines, Dish Washers, Geysers, Steam Iron, Coffee Makers, Bath Tubs, Bathroom Fixtures etc.</font></p>
<p>
• <strong><span style="background-color: #f0ffff">Buildings </span></strong>- Chillers, Cooling Towers, Pipework</p>
<p>
• <strong><span style="background-color: #e6e6fa">Chemicals </span></strong>- Dryers, Extruders, Kettles, Mixers, Reactors, Scrubbers, Vacuum Pumps</p>
<p>
• <strong><span style="background-color: #0ff">Food </span></strong>- Condensers, Ice Machines, Kathabars, Refrigeration Equipment, Steam Tables</p>
<p>
• <strong><span style="background-color: #ffff00">Manufacturing </span></strong>- Chillers, Compressors, Furnaces, Quenchers, Vacuum Pumps</p>
<p>
• <strong><span style="background-color: #40e0d0">Metals </span></strong>- Bearings, Castings, Fans, Hearth & Vacuum Furnaces, Shelters, Sprays</p>
<p>
• <strong><span style="background-color: #00ff00">Mining </span></strong>- Bearings, Conveyors, Filters, Presses, Process Lines, Radiators</p>
<p>
• <strong><span style="background-color: #ee82ee">Paper</span></strong>- Calendar Mill Rolls, Caustic Lines, Scrubbers, Compressors, Liquor Tanks, Pulverizers, Vacuum Pumps</p>
<p>
• <strong>Pharmaceutical</strong>- Exchangers, Loop Systems, Kathabars, Pumps, Reactors, Stills, Sterilizers</p>
<p>
• <strong>Refinery </strong>- Compressors, Converters, Crackers, Exchangers, Piping, Pumps</p>
<p>
• <strong>Rubber/Plastics </strong>- Banbury Mixers, Calendar & Mill Rolls, Extruders, Injection Molders, Molds, Temperature Control Units, Throat Coolers, Towers, Tubers</p>
<p>
• <strong>Steel </strong>- Bearings, ConCast Units, Generators, Hearths, Spangle Units, Furnaces</p>
<p>
• <strong>Textile </strong>- Air Washers,Compressors, Condensers, Exchangers, Extruders,Towers</p>
<p>
 </p>
<p align="center">
<strong>Boilers</strong></p>
<p align="center">
<strong>Condensers</strong></p>
<p align="center">
<strong>Filters</strong></p>
<p align="center">
<strong>Heat Exchangers</strong></p>
<p align="center">
<strong>Kettles & Tanks</strong></p>
<p align="center">
<strong>Pipelines</strong></p>
<p align="center">
<strong>Pots</strong></p>
<p align="center">
<strong>Reactors</strong></p>
<p align="center">
<strong>Steam Jackets</strong></p>
<p align="center">
<strong>Bath Rooms and Showers</strong></p>
<p align="center">
<strong>Metal Processing and much more!</strong></p>
<p>
<br />
 </p>
<p>
<strong>Applications</strong></p>
<table border="0" cellpadding="2" cellspacing="2" class="tableBorder" width="100%">
<tbody>
<tr>
<td background="images/tableback.png" valign="top" width="159">
<br />
  <strong>Automotive</strong></td>
<td background="images/tableback.png" valign="top" width="189">
<br />
  <strong>Bottling</strong></td>
<td background="images/tableback.png" valign="top" width="202">
<br />
  <strong>Chemicals</strong></td>
<td background="images/tableback.png" valign="top" width="175">
<br />
  <strong>Food</strong></td>
</tr>
<tr>
<td class="style9" valign="top" width="159">
<br />
  <strong>- Closed Circuit Cooling<br />
<br />
  - Dynamometers<br />
<br />
  - Extruders<br />
<br />
  - Molders<br />
<br />
  - Radiators<br />
<br />
  - Welders</strong></td>
<td class="style9" valign="top" width="189">
<br />
  <strong>- CO2 Generators<br />
<br />
  - Heaters<br />
<br />
  - Exchangers<br />
<br />
  - Rinse Tanks<br />
<br />
  - Sterilizers and Washers</strong></td>
<td class="style9" valign="top" width="202">
<br />
  <strong>- Dryers<br />
<br />
  - Extruders<br />
<br />
  - Kettles<br />
<br />
  - Mixers<br />
<br />
  - Reactors<br />
<br />
  - Scrubbers<br />
<br />
  - Vacuum Pumps</strong></td>
<td class="style9" valign="top" width="175">
<br />
  <strong>- Condensers<br />
<br />
  - Ice Machines<br />
<br />
  - Kathabars<br />
<br />
  - Refrigeration Equipment<br />
<br />
  - Steam Tables</strong></td>
</tr>
<tr>
<td background="images/tableback.png" valign="top" width="159">
<br />
  <strong>Manufacturing</strong></td>
<td background="images/tableback.png" valign="top" width="189">
<br />
  <strong>Metals</strong></td>
<td background="images/tableback.png" valign="top" width="202">
<br />
  <strong>Mining</strong></td>
<td background="images/tableback.png" valign="top" width="175">
<br />
  <strong>Paper</strong></td>
</tr>
<tr>
<td class="style9" valign="top" width="159">
<br />
  <strong>- Chillers<br />
<br />
  - Compressors<br />
<br />
  - Furnaces<br />
<br />
  - Quenchers<br />
<br />
  - Vacuum Pumps</strong></td>
<td class="style9" valign="top" width="189">
<br />
  <strong>- Bearings<br />
<br />
  - Conveyors<br />
<br />
  - Fans<br />
<br />
  - Hearth & Vacuum Furnaces<br />
<br />
  - Shelters<br />
<br />
  - Sprays</strong></td>
<td class="style9" valign="top" width="202">
<br />
  <strong>- Bearings<br />
<br />
  - Conveyors<br />
<br />
  - Filters<br />
<br />
  - Presses<br />
<br />
  - Process Lines<br />
<br />
  - Radiators</strong></td>
<td class="style9" valign="top" width="175">
<br />
  <strong>- Calendar Rolls<br />
<br />
  - Mill Rolls<br />
<br />
  - Caustic Lines<br />
<br />
  - Scrubbers<br />
<br />
  - Compressors<br />
<br />
  - Liquor Tanks<br />
<br />
  - Pulverizers<br />
<br />
  - Vacuum Pumps</strong></td>
</tr>
<tr>
<td background="images/tableback.png" valign="top">
<br />
  <strong>Pharmaceutical</strong></td>
<td background="images/tableback.png" valign="top">
<br />
  <strong>Refinery</strong></td>
<td background="images/tableback.png" valign="top">
<br />
  <strong>Rubber & Plastics</strong></td>
<td background="images/tableback.png" valign="top">
<br />
  <strong>Steel</strong></td>
</tr>
<tr>
<td class="style9" valign="top">
<br />
  <strong>- Exchangers<br />
<br />
  - Loop Systems<br />
<br />
  - Kathabars<br />
<br />
  - Pumps<br />
<br />
  - Reactors<br />
<br />
  - Stills<br />
<br />
  - Sterilizers</strong></td>
<td class="style9" valign="top">
<br />
  <strong>- Compressors<br />
<br />
  - Converters<br />
<br />
  - Crackers<br />
<br />
  - Exchangers<br />
<br />
  - Piping<br />
<br />
  - Pumps</strong></td>
<td class="style9" valign="top">
<br />
  <strong>- Banbury Mixers<br />
<br />
  - Calendar & Mill Rolls<br />
<br />
  - Extruders<br />
<br />
  - Injection Molders<br />
<br />
  - Molds<br />
<br />
  - Temperature Control - Units<br />
<br />
  - Throat Coolers<br />
<br />
  - Towers and Tubers</strong></td>
<td class="style9" valign="top">
<br />
  <strong>Bearings<br />
<br />
  ConCast Units<br />
<br />
  Generators<br />
<br />
  Hearths<br />
<br />
  Spangle Units<br />
<br />
  Furnaces</strong></td>
</tr>
<tr>
<td background="images/tableback.png" valign="top">
<br />
  <strong>Textile</strong></td>
<td background="images/tableback.png" valign="top">
<br />
  <strong>Utilities</strong></td>
<td background="images/tableback.png" valign="top">
<br />
  <strong>Other Applications</strong></td>
<td valign="top">
<br />
  <strong> </strong></td>
</tr>
<tr>
<td class="style9" valign="top" width="159">
<br />
  <strong>- Air Washers<br />
<br />
  - Compressors<br />
<br />
  - Condensers<br />
<br />
  - Exchangers<br />
<br />
  - Extruders and Towers</strong></td>
<td class="style9" valign="top" width="189">
<br />
  <strong>- Boilers<br />
<br />
  - Turbines<br />
<br />
  - Transformers<br />
<br />
  - Cooling Towers<br />
<br />
  - Air Compressors<br />
<br />
  - Hydrogen Coolers<br />
<br />
  - Lube Oil Heat Exchangers</strong></td>
<td class="style9" valign="top" width="202">
<br />
  <strong>- Ball Mills<br />
<br />
  - Demisters<br />
<br />
  - Evaporators<br />
<br />
  - Locomotives<br />
<br />
  - Absorption Units<br />
<br />
  - Diesel Generators<br />
<br />
  - Induction Furnaces</strong></td>
</tr>
</tbody>
</table>
<p style="text-align: justify;">
Descaling Chemical manufacturers, Descaling Chemical suppliers, Descaling Chemicalproducers, Descaling Chemical exporters,<br />
 </p>

Technical Specifications

<p style="text-align: justify;">
<span style="font-family: arial, sans-serif; font-size: small;">Typical descaling cleaning procedure :</span><br style="font-family: arial, sans-serif; font-size: small;" />
<br style="font-family: arial, sans-serif; font-size: small;" />
<span style="font-family: arial, sans-serif; font-size: small;">1st Stage : Take ‘RXSOL-11-1053-010’ weblink ( <a href="http://rxmarine.com/Alkaline-Descaler">http://rxmarine.com/Alkaline-Des…; )   and mix with water in the ratio of 1:6 (One litre of RXSOL-1053 and six litres of water). Circulate the solution or immerse the equipment in this solution for 2 hrs. This will be helpful in loosening the hard deposited scale. </span></p>
<div style="font-family: arial, sans-serif; font-size: small; text-align: justify;">
2nd Stage : Circulate the entire system with ample fresh water, at least for 10 minutes.<br />
 </div>
<div style="font-family: arial, sans-serif; font-size: small; text-align: justify;">
3rd Stage : Take ‘RXSOL-40-1048-025’ and mix with water in the ratio of 1:6 (One litre of RXSOL-1048 and six litres of water). Circulate the solution or immerse the equipment in this solution for 6-8 hrs.<br />
 </div>
<div style="font-family: arial, sans-serif; font-size: small;">
4th Stage : Flush the entire system with ample fresh water, at least for  20 minutes.<br />
 </div>
<div style="font-family: arial, sans-serif; font-size: small; text-align: justify;">
5th Stage :  Take ‘RXSOL-11-1053-010’ weblink ( <a href="http://rxmarine.com/Alkaline-Descaler">http://rxmarine.com/Alkaline-Des…; )  and mix with water in the ratio of 1:6 (One litre of NF and six litres of water). Circulate the solution or immerse the equipment in this solution for 2 hrs.<br />
<br />
 </div>
<div style="font-family: arial, sans-serif; font-size: small; text-align: justify;">
6th Stage : Flush the entire system with ample fresh water, till the ph value of outlet water  match as fresh water. </div>

Application

<p style="text-align: justify">
RXSOL-40-1048-025  is mixed with fresh water 3 to 20 percent depending on deposition of scaling.<br />
<br />
If the equipment to be cleaned is contaminated by oil, grease, sludge or carbonized oil, then first of all clean the system with degreaser  <a href="http://www.rxmarine.com/node/15">RXSOL-10-1005</a&gt;. RXSOL-40-1048 should be mixed with fresh water to form a solution of 10-30%, depending on the extent of scaling.   <br />
<br />
PRECAUTION :::it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of  <a href="http://www.rxmarine.com/node/129">RXSO-20-2005  </a>in fresh water. This solution should be circulated for 2-4 hours or until an <em><span style="font-size: 18px">acceptable pH value is obtained</span></em>. This will neutralize any remaining acidity & passivate steel surfaces.<br />
<br />
<br />
<span style="color: rgb(0,0,0)"><strong><span style="background-color: rgb(255,255,255)">Procedure-of-use: </span></strong><span style="background-color: rgb(255,255,255)">The most effective descaling is accomplished by circulation.In the case of small components,the soak method in an immersion bath can be used. If the equipment to be cleaned is contaminated by oil, grease or sludge, then pre-cleaning with DEGREASER ( RXSOL OB 1005 ) is necessary. Depending on the extent of scaling, use a solution of 2.5-10% </span></span>RXSOL-40-1048-025<span style="color: rgb(0,0,0)"><span style="background-color: rgb(255,255,255)"> . </span></span></p>
<h4>
RXSOL-40-1048-025 ( We have 2 grade 1 is with colour indicator , while other one dont have indicator ) </h4>
<p style="text-align: justify">
<span style="color: rgb(0,0,0)"><span style="background-color: rgb(255,255,255)">The solution will have a red colour which changes to orange when 85% of the acid has been neutralized , & to colourless  when the solution is totally neutralized. Whenever possible, the solution should be heated to 60°C.Neutralised  solutions can be re-activated by adding more </span></span>RXSOL-40-1048-025<span style="color: rgb(0,0,0)"><span style="background-color: rgb(255,255,255)">  until the red colour reappears. </span></span></p>
<p style="text-align: justify">
<span style="color: rgb(0,0,0)"><strong><span style="background-color: rgb(255,255,255)">Fields: </span></strong><span style="background-color: rgb(255,255,255)">Descaling of  Boilers, Descaling  of Diesel Engine Cooling Systems, Condenser, Pipeline collection system, Evaporators, Calorifiers, Heat Exchangers,The strength of the acid can be enhanced by adding 1part sodium chloride (common salt) to 20 parts of Descalex.If salt is not available, an acceptable alternative is to dissolve </span></span>RXSOL-40-1048-025<span style="color: rgb(0,0,0)"><span style="background-color: rgb(255,255,255)">  in sea water. After use of </span></span>RXSOL-40-1048-025<span style="color: #000"><span style="background-color: rgb(255,255,255)">  a  0.5% solution of Alkalinity Control in fresh  water should be used for neutralization.</span></span></p>

Industrial Area

<br />

Dose

<p style="text-align: justify;">
After using  <span style="text-align: justify;">RXSOL-40-1048-025</span>, sense all metal surfaces with 0.5 percent of  <a href="http://www.rxmarine.com/node/15">RXSOL-10-1005</a&gt;, at least 2-4 hour , up to neutral of PH value.<br />
<br />
• Fast and effective scale remover.<br />
• Soft on ferrous metals.<br />
• Removes water scale & rust from boilers/diesel engine & other cooling system<br />
• As well as from condensers, evaporators, & heat exchangers etc<br />
 </p>
<p>
<em><span style="font-size: 14px"><strong><span style="background-color: #ffffe0">Why Use RXSOL Descaler?</span></strong></span></em></p>
<ul>
<li style="text-align: justify;">
It is a safe , economical concentrated  chemical to be used on the waterside of heat transfer equipment.</li>
<li style="text-align: justify;">
You do not have to heat <span style="text-align: justify;">RXSOL-40-1048-025</span> .<br />
<span style="text-align: justify;">RXSOL-40-1048-025</span>  is safer for the employees to use than other acid products.</li>
<li>
<div align="justify">
Your equipment will be cleaned in only hours without disassembling any part of the equipment. Equipment can also be cleaned without any down time (cleaning on the run).</div>
</li>
<li style="text-align: justify;">
 Cleans down to the original surface without <span style="font-size: 16px"><strong>pitting</strong></span>.</li>
<li style="text-align: justify;">
<span style="background-color: #0ff"> </span><span style="background-color: #f0ffff"><span style="text-align: justify;">RXSOL-40-1048-025</span> is safe on </span><em><span style="font-size: 16px"><span style="background-color: #f0ffff">copper, copper-nickel, bronze, brass, iron, stainless steel and rubber.</span></span></em></li>
<li style="text-align: justify;">
 <span style="text-align: justify;">RXSOL-40-1048-025</span>  will extend the usable life of your equipment, especially when used as a part of a regularly scheduled preventative maintenance program.</li>
<li style="text-align: justify;">
 Removing the scale build up allows your equipment to operate more efficiently with less down time.</li>
</ul>
<p>
TIPS for General Uses ::: </p>
<p style="text-align: justify;">
<span style="font-family: arial, sans-serif; font-size: small;">The steam boiler which has solid mass of mineral deposits approximate mass calculation will help to use proper volume of </span><span style="text-align: justify;">RXSOL-40-1048-025</span><span style="text-align: justify; color: rgb(0, 0, 0);">  Descaler. As </span><span style="color: rgb(0, 0, 0); text-align: justify;">per gallon in concentrated form of </span><span style="text-align: justify;">RXSOL-40-1048-025</span><span style="text-align: justify; color: rgb(0, 0, 0);"> </span><span style="text-align: justify; color: rgb(0, 0, 0);"> has the ability to dissolve approximately </span><span style="text-align: justify; color: rgb(255, 0, 0);"><span style="font-size: 14px;"><span style="background-color: rgb(173, 216, 230);">1.5kg of </span><em><span style="background-color: rgb(173, 216, 230);">scale mass</span></em></span></span><span style="text-align: justify; color: rgb(0, 0, 0);"> </span><br style="font-family: arial, sans-serif; font-size: small;" />
<span style="font-family: arial, sans-serif; font-size: small;">For example if descaling required for </span><span style="font-family: arial, sans-serif; font-size: small;">home appliances , brewing shop 1 - 3 Table spoon is sufficient to clean while for Industrial cleaning multiple Gallon volume required.</span></p>
<div style="font-family: arial, sans-serif; font-size: small; text-align: justify;">
<br />
As for the other parts,  The <span style="font-family: Arial, Verdana, sans-serif; font-size: 12px; text-align: justify;">RXSOL-40-1048-025</span> works more quickly with hot water than cold. Try using <span style="font-family: Arial, Verdana, sans-serif; font-size: 12px; text-align: justify;">RXSOL-40-1048-025</span> with the hot maintain the temperature. And give sufficint time to dissolve mineral deposits in some cases complete dissolving may reuqire bath water above 100F over night period.<br />
<br />
Home application ::: <br />
Around two tablespoons to a liter of water is a 'normal' mix. You could go 3 or 4 tablespoons for heavier scale. When I do my every 6 months descale I use the 2 tablespoons per liter mix and it works just fine. Hot water is more aggressive so when you put all the parts in a tub to descale, put your water and <span style="font-family: Arial, Verdana, sans-serif; font-size: 12px; text-align: justify;">RXSOL-40-1048-025</span> in a bit stock pot, bring it to a low boil then dump it in your tub with the parts.<br />
<br />
Almost forgot, do not use an aluminum pot or Teflon coated. Use stainless. The acidic part of <span style="font-family: Arial, Verdana, sans-serif; font-size: 12px; text-align: justify;">RXSOL-40-1048-025</span> will eat up the aluminum and may blister the Teflon. </div>

Useful Area

<br />

Locations

<p style="text-align: justify;">
Descaling chemicals, scale remover, Descalex powder, Safe Acid manufacturer, exporter and supplier in India, Oman, Middle East. We are also popular name as a descaling chemicals supplier in Fujairah, Muscat, Mumbai, Gandhidham, Visakhapatnam, Chennai, Kolkata Howrah. And we have daily day by day descaling supply services in Dubai, Sharjah, Ajman, Abudhabi, umm al quwain in UAE, and Barka, Salalah, Sohar, Muscat in Oman, And Surat Hazira, Howrah, Paradip, Haldia, Ennore, Chennai, Visakhapatnam, Gangavaram, Jamnagar Sikka, Mundra, Kandla Gujrat, Sudan, Yemen, Africa, Nairobi KENYA</p>

Keywords

<br />

About

We are professional and reliable provider since we offer customers the most powerful and beautiful themes. Besides, we always catch the latest technology and adapt to follow world’s new trends to deliver the best themes to the market.

Contact info

logo

Tank Cleaner provides marine tank cleaning, degassing, and gas-freeing services for chemical tankers, oil tankers, and gas carriers calling at Indian ports.

Featured Post