Title

RXSOL ORG 3 Powerful Cleaner

<p style="text-align: justify;">
<span style="color: rgb(0,0,0)"><strong><span style="background-color: rgb(255,255,255)">Proedure Of Use :</span></strong><br />
<strong><span style="background-color: rgb(255,255,255)">1st Method :</span></strong><span style="background-color: rgb(255,255,255)"> Mix 1 part of </span></span>RXSOL-19-1421-025 <span style="color: rgb(0,0,0)"><span style="background-color: rgb(255,255,255)">with 2 -10 parts of water / GAS-OIL  , For heavy oil,greasy surface use directly)Spray directly on the entire surface to be cleaned. This can be achieved by Hand spray / mechanical spray pump. Immediately after 2 -5 minute of spray the </span></span>RXSOL-19-1421-025<span style="color: rgb(0,0,0)"><span style="background-color: rgb(255,255,255)"> starts its function. The Dirt, oil grease etc will loosen. 5 to 6 minutes after spraying start rinsing the system with water (High pressure recommended). Dirt and mud starts vanishing with cleaning media and water.</span><br />
<br />
<strong><span style="background-color: rgb(255,255,255)">2nd Method: </span></strong><span style="background-color: rgb(255,255,255)">Application in immersion process with or without ultrasonic support, manual wipping.</span><br />
<br />
<strong><span style="background-color: rgb(255,255,255)">3rd Method: </span></strong></span>RXSOL-19-1421-025<span style="color: #000"><strong><span style="background-color: rgb(255,255,255)"> </span></strong><span style="background-color: rgb(255,255,255)">is also used in conjunction with alkaline degreasing bath at 3-5% (v/v) concentration for better and quick degreasing action. Eithers the bath is heated to be 70c or the solution can be stirred or air agitated.</span></span></p>
<p style="text-align: justify;">
<span style="color: rgb(255, 0, 0);"><strong><span style="font-family: verdana, geneva, sans-serif;">Chemical Tank Cleaning</span></strong></span></p>
<p>
FOR TANK CLEANING</p>
<p>
<strong><font size="3">RECOMMENDATION : 0.2% TO 100% </font></strong><br />
 </p>
<p style="text-align: justify;">
<u style="color: rgb(0, 0, 0);"><strong>Procedure for Use :-</strong></u></p>
<ul>
<li>
<span style="color: rgb(0, 0, 0);"><strong>RXSOL-19-1421-025 </strong>is highly concentrate</span></li>
<li style="text-align: justify;">
<span style="color: rgb(0, 0, 0);">Dilute in water as per surface deposition.</span></li>
<li>
<span style="color: rgb(0, 0, 0);">Diluted materials apply on rusted area for 15 to 20 minutes then wash off with water repeat if necessary. </span><span style="color: rgb(0, 0, 0);">For stubborn rusted stains.)</span></li>
</ul>
<p style="text-align: justify;">
<span style="color: rgb(0, 0, 0);"><u><strong>NOTE :-</strong></u></span><br />
RXSOL-19-1421-025<span style="color: rgb(0, 0, 0);"> should be applied at full concentration  for heavy stains, or diluted to 20-50% for light stains. Allow to soak for 15 to 30 minutes and wash off with water. A second application may be necessary to remove the stubborn stains.</span></p>
<p style="text-align: justify;">
<span style="color: rgb(0, 0, 0);"><strong><u>Spraying Direction</u> :-</strong><br />
Using an empty / clean 210 liter drum, fill with 190 liter of fresh water and add 20 liters of </span>RXSOL-19-1421-025 <span style="color: rgb(0, 0, 0);"> This makes a 10% solution, which can be sprayed onto areas.  Once spraying is completed, wait 20-30 minutes and fresh water rinse with lots of water, if possible use butterworth machines for a more efficient result.  This method can be used in stainless tanks to “freshen up” the look of the stainless materials.  Make sure to rinse the tank very well, as residual detergent within the </span>RXSOL-19-1421-025<span style="color: rgb(0, 0, 0);"> will show up in a Wall Wash.<br />
<br />
Injection – Not suitable.</span></p>
<p style="text-align: justify;">
<span style="color: rgb(0, 0, 0);"><u><strong>Re-circulation :</strong>–</u><br />
When hand spraying is inadequate (too much area to cover), prepare a 2% - 5% solution in the tank using fresh water, heat solution to 50^o C, then circulate the solution through butterworth machines for 3 x 45 minutes drops minimum.  When using fixed machine recirculate for a minimum of 3 cycles.  Rinse out the tank using hot seawater 85^o C for 2 hours making sure that there is no form remaining in the water at the pumpstack drain cock.  After the hot wash, the tank must be rinsed with fresh water and dried.</span></p>
<p>
<br />
<span style="color: rgb(0, 0, 0);">* Use a strainer at the pumpstack when circulating any solution.</span></p>
<p>
<span style="color: rgb(0, 0, 0);"><span style="font-size: 14px;"><strong><span style="background-color: rgb(240, 255, 255);">  Tank Lining </span></strong></span><span style="background-color: rgb(240, 255, 255);">– </span><span style="background-color: rgb(240, 255, 255);">Stainless / Epoxy, Phenolic</span></span></p>