SKU
RXSOL-51-2066-220
Title
Antifoam Defoamer AF10
Title
Antifoam Defoamer AF10
<p style="text-align: justify;">
New Generation with advanced formulation Antifoam Defoamer AF10 is a highly effective liquid product formulated to control foaming and priming in <span style="font-size:18px;">seawater distillation plants</span>. Antifoam Defoamer AF10 has proven effectiveness during many years use in distillation plants throughout the world.</p>
<p data-end="468" data-start="190">
Antifoam for Seawater Desalination systems or other aqueous systems by RXSOL is a high-performance antifoam formulation based on a synergistic blend of <strong data-end="324" data-start="297">modified alcohols</strong> and <strong data-end="358" data-start="329">polymerised glycol ethers</strong>, specifically developed to control foam formation in seawater intake, pretreatment, and desalination systems.</p>
<p data-end="852" data-start="470">
The product rapidly collapses existing foam while providing extended foam suppression in seawater streams containing natural organic matter, algae-derived surfactants, hydrocarbons, biological contaminants, and suspended solids. The combination of fast-acting antifoam component and persistent foam-control properties of the polymerised glycol ether delivers both immediate knockdown and long-lasting antifoam performance.</p>
<p data-end="1027" data-start="854">
The product is designed for continuous or intermittent injection into seawater make-up lines to minimize operational problems associated with foaming in desalination plants.</p>
Category
Evaporator Treat-51
Product Remarks
Remarks
<p style="text-align: justify;">
<span style="font-size:16px;">Low dose levels, typically in the range 0.05 to 0.1 mg/l in the seawater feed stream, depending on feed water quality. Activity is not dependent on temperature. No need to alter dose level if top brine temperature (TBT) changes. Negligible steam volatility and carry over into the distillate.</span></p>
<p>
RXSOL-51-2066-220 is antifoam emulsion and its more concentrated antifoam emulsion. It has excellent candidates for controlling foam in amine and glycol dehydration units. This is suitable products for gas plants and have excellent stability in the presence of salts, resulting in reduced deposits on the plant’s equipment. RXSOL-51-2066-220 help preserves foam control under the severe conditions of a dehydrating unit. These conditions can remove water from other antifoam emulsions, rendering them immediately inactive.</p>
Tag Identification
Tag Identification
<p>
#Antifoam_Defoamer<br />
#Defoamer_ManufacturerSupplier</p>
<p>
#Antifoam_for_Seawater_Distillation_Plants_in_UAE</p>
<p>
#Antifoam_for_Seawater_Distillation_Plants_in_OMAN</p>
<p>
#Antifoam_for_Seawater_Distillation_Plants_in_INDIA</p>
<p>
#AntifoamM8ManufacturerinDubai</p>
<p>
#AntifoamM8ManufacturerinSohar</p>
Field Note
Note
<p style="text-align: justify;">
<strong>Key Features and Benefits</strong></p>
<ul>
<li style="text-align: justify;">
Quick foam knockdown - particularly useful when foam suddenly builds up in the absorber and rapid control is needed.</li>
<li style="text-align: justify;">
Excellent stability at high temperatures - because of their excellent dispersibility. Antifoam Defoamer AF10 do not show a propensity to deposit on heat exchangers as many other antifoams tend to. Instead, they remain finely dispersed in the amine or glycol solution and are eventually filtered out.</li>
<li style="text-align: justify;">
Easy dilution and use - simple addition of water and minimum agitation is sufficient to dilute RXSOL-51-2066-220 antifoam emulsion to required concentrations. Pumping of the diluted emulsions is easy, due to their low viscosity.</li>
<li style="text-align: justify;">
Reduced clogging or scaling in the heat exchangers - potentially resulting in less service maintenance.</li>
<li style="text-align: justify;">
Low concentrations can provide effective foam control - RXSOL-51-2066-220 Antifoam Defoamer AF10 emulsion and often two to three times more effective than other antifoams used in treating units.</li>
</ul>
<p style="text-align: justify;">
<strong>Product Safety, Handling and Storage</strong></p>
<p style="text-align: justify;">
Customers should review the latest Material Safety Data Sheet (MSDS) and label for product safety information, safe handling instructions, personal protective equipment if necessary, and any special storage conditions required for safety. MSDS are available at <a href="http://www.rxmarine.com/">www.rxmarine.com</a> or, upon request, from any<em><strong> RX MARINE INTERNATIONAL </strong></em>representative. For product storage and handling procedures to maintain the product quality within our stated specifications, please review Certificates of Analysis, which are available in the Order Center.</p>
<p style="text-align: justify;">
</p>
<p style="text-align: justify;">
<strong>Comarision to Antifoam Defoamer (S<span style="color: rgb(0, 0, 0); font-family: Arial, Helvetica, sans-serif; font-size: 11px; background-color: rgb(255, 255, 204);">ilicone based</span>)</strong></p>
<table>
<thead>
<tr>
<th>
Antifoam AF10 (RXSOL-51-2066)</th>
<th>
Antifoam Defoamer (Silicon based)</th>
</tr>
</thead>
<tbody>
<tr>
<td>
Rapid dispersion</td>
<td>
Moderate</td>
</tr>
<tr>
<td>
Lower fouling tendency</td>
<td>
Higher fouling risk</td>
</tr>
<tr>
<td>
Easier dilution</td>
<td>
Difficult</td>
</tr>
<tr>
<td>
Better seawater compatibility</td>
<td>
Good</td>
</tr>
<tr>
<td>
Lower deposit formation</td>
<td>
Moderate</td>
</tr>
<tr>
<td>
Suitable for continuous dosing</td>
<td>
Excellent</td>
</tr>
</tbody>
</table>
Technical Specifications
<p>
</p>
<div id="cke_pastebin">
<table border="0" cellpadding="1" cellspacing="1">
<tbody>
<tr>
<td>
Appearance</td>
<td>
Clear to Pale Yellow Liquid</td>
</tr>
<tr>
<td>
<br />
Water content</td>
<td>
4-5% w/w</td>
</tr>
<tr>
<td>
Aqueous Emulsion</td>
<td>
Ready dispersible white milky emulsion</td>
</tr>
<tr>
<td>
Specific Gravity at 25°/25°C</td>
<td>
1</td>
</tr>
<tr>
<td>
Odour</td>
<td>
Slight</td>
</tr>
<tr>
<td>
Specific Gravity</td>
<td>
<1</td>
</tr>
<tr>
<td>
Saponifaction Value</td>
<td>
11-15 mg KOH/g</td>
</tr>
</tbody>
</table>
</div>
Application
<p>
The foaming tendency of seawater in distillation plants is unpredictable. It is generally thought that foam is formed when organic compounds are concentrated in the brine, giving rise to surface active effects which increase the liquid film strength at phase interfaces. Antifoam Defoamer AF10 is not soluble in water. At use concentrations (0.05 - 0.1 mg/l) Antifoam Defoamer AF10 forms a micro-emulsion and during evaporation is incorporated into the surface liquid film of bubbles where it acts as a surfactant and reduces the film strength. The result is that the film readily ruptures and a stable foam does not form. In this way a uniform boiling or flashing action is achieved and carry-over is minimised.</p>
<p>
<strong>Where to use ANTIFOAM AF10 for foam knockdown?</strong></p>
<div id="cke_pastebin">
<strong>Desalination Plants</strong></div>
<ul>
<li>
Reverse Osmosis (RO) Plants</li>
<li>
Multi-Stage Flash (MSF) Plants</li>
<li>
Multi-Effect Distillation (MED) Plants</li>
<li>
Hybrid Desalination Facilities</li>
</ul>
<div id="cke_pastebin">
<strong>Seawater Systems</strong></div>
<ul>
<li>
Intake Channels</li>
<li>
Seawater Make-up Lines</li>
<li>
Pumping Stations</li>
<li>
Equalization Basins</li>
<li>
Clarifiers</li>
<li>
Dissolved Air Flotation (DAF) Units</li>
<li>
Pretreatment Systems</li>
</ul>
<div id="cke_pastebin">
<strong>Industrial Water Systems</strong></div>
<ul>
<li>
Power Plant Cooling Water Intakes</li>
<li>
Refinery Seawater Systems</li>
<li>
Petrochemical Facilities</li>
<li>
Offshore Platforms</li>
<li>
LNG Terminals</li>
</ul>
Industrial Area
<p>
<strong>What causes foam in aqueous systems like desalination plants?</strong></p>
<div id="cke_pastebin">
Foam formation in seawater is typically caused by naturally occurring surfactants generated from:</div>
<ul>
<li>
Algae and plankton</li>
<li>
Organic decomposition products</li>
<li>
Hydrocarbon contamination</li>
<li>
Biological activity</li>
<li>
Turbulent mixing and aeration</li>
</ul>
<p>
Quick foam knockdown plus extended foam prevention properties in RXSOL Antifoam AF10</p>
<table>
<thead>
<tr>
<th>
Parameter</th>
<th>
Performance</th>
</tr>
</thead>
<tbody>
<tr>
<td>
Foam Knockdown Speed</td>
<td>
Excellent</td>
</tr>
<tr>
<td>
Foam Suppression Duration</td>
<td>
Excellent</td>
</tr>
<tr>
<td>
Seawater Compatibility</td>
<td>
Excellent</td>
</tr>
<tr>
<td>
Non-Silicone Performance</td>
<td>
Excellent</td>
</tr>
<tr>
<td>
Residue Formation</td>
<td>
Very Low</td>
</tr>
<tr>
<td>
Membrane Compatibility</td>
<td>
Good</td>
</tr>
<tr>
<td>
Continuous Dosing Suitability</td>
<td>
Excellent</td>
</tr>
</tbody>
</table>
Dose
<div id="cke_pastebin">
Antifoam Defoamer AF10 can be used to control foaming in all types of seawater distillation plant and is particularly suitable for use in multi-stage flash plants. Antifoam Defoamer AF10 is a formulated product containing ethylene oxide / propylene oxide block copolymer. Antifoam Defoamer AF10 is typically dosed as a 1% w/w emulsion in distillate prepared as follows:</div>
<ul>
<li>
Add 50% - 70% of required distillate volume into dosing tank;</li>
<li>
Start the dosing tank agitator/mixer;</li>
<li>
Add the required Antifoam Defoamer AF10 volume into the dosing tank;</li>
<li>
Add the remaining volume of distillate to give the required concentration of Antifoam Defoamer AF10 solution;</li>
<li>
Continue agitation for a further 10 - 15 minutes;</li>
<li>
The resulting emulsion will be stable and will not normally separate</li>
</ul>
<p>
The dose level required will depend on the quality of the seawater feed (e.g. dissolved organics, suspended solids) but is typically found to be in the range 0.05 to 0.1 mg/l and is subject to optimisation as operating experience is gained. Dose level is not dependent on operating temperature of the distillation plant. Recommended injection points are either into the seawater make-up line after any external de-aeration and decarbonation equipment, or into the recycle brine stream at a suitable point after the blowdown and typically into the discharge of the recycle brine pump.</p>
<p>
General-purpose antifoams have a wide range of applicability, but not all of them are suitable for use in the treatment. Some foam control agents can aggravate the problem. Foam control in gas scrubbers is only one of the process parameters to be monitored. It is equally important to prevent or slow the fouling of the unit, because dismantling of the gas-scrubbing units is manually intensive. Incorrectly specified antifoams can easily lead to increased fouling and clogging, particularly in the heat exchangers. Momentive Performance Materials RXSOL antifoams are designed to provide foam control with a minimum of such problems.</p>
<p>
</p>
<p>
<span style="font-size:18px;"><strong>Dosing for Desalination plants/aqueous systems</strong></span></p>
<div id="cke_pastebin">
Actual dosage requirements depends upon:</div>
<ul>
<li>
Organic loading</li>
<li>
Algal concentration</li>
<li>
Turbulence level</li>
<li>
Intake water quality</li>
<li>
Seasonal variations</li>
</ul>
<table>
<thead>
<tr>
<th>
Application Condition</th>
<th>
Recommended Dosage</th>
</tr>
</thead>
<tbody>
<tr>
<td>
Normal Operation</td>
<td>
0.5 - 5 ppm</td>
</tr>
<tr>
<td>
Moderate Foaming</td>
<td>
2 - 10 ppm</td>
</tr>
<tr>
<td>
Severe Foaming</td>
<td>
5 - 20 ppm</td>
</tr>
<tr>
<td>
Shock Treatment</td>
<td>
10 - 50 ppm</td>
</tr>
</tbody>
</table>
Useful Area
<div>
<strong>How RXSOL ANTIFOAM AF 10 for DESALINATION PLANTS is beneficial for effective foam knockdown?</strong></div>
<div>
</div>
<div id="cke_pastebin">
<strong>Dual Action Foam Control</strong></div>
<ul>
<li>
Instant foam collapse through modified polyol action.</li>
<li>
Long-term foam suppression through polymerised poly glycol ether technology.</li>
</ul>
<div id="cke_pastebin">
<strong>Fast Dispersion</strong></div>
<ul>
<li>
Rapid distribution throughout seawater systems.</li>
<li>
Immediate contact with foam-generating zones.</li>
</ul>
<div id="cke_pastebin">
<strong>Extended Foam Prevention</strong></div>
<ul>
<li>
Reduces re-formation of foam after treatment.</li>
<li>
Maintains stable process conditions.</li>
</ul>
<div id="cke_pastebin">
<strong>Improved Plant Reliability</strong></div>
<ul>
<li>
Minimizes overflow and air entrainment.</li>
<li>
Reduces process interruptions.</li>
</ul>
<div id="cke_pastebin">
<strong>Excellent Seawater Compatibility</strong></div>
<ul>
<li>
Effective across a wide salinity range.</li>
<li>
Suitable for open seawater intake systems.</li>
</ul>
<div id="cke_pastebin">
<strong>Low Fouling Characteristics</strong></div>
<ul>
<li>
Non-silicone formulation.</li>
<li>
Minimal risk of membrane fouling compared with conventional silicone antifoams.</li>
</ul>
<div id="cke_pastebin">
<strong>Easy Dosing</strong></div>
<ul>
<li>
Suitable for automated dosing systems.</li>
<li>
Can be continuously injected using standard metering pumps.</li>
</ul>
Locations
<p style="text-align: justify;">
Antifoam Defoamer Elite M8 manufacturer, exporter and supplier in India Mumbai, Kolkata, Chennai, Vizag, Gandhidham, Surat, UAE Middle East Dubai, Sharjah, Ajman, ABudhabi, Iraq, Kuwait, Oman Muscat Barka, Canada</p>
Keywords
<div id="cke_pastebin">
DESALINATION PLANTS ( ANTISCALANT & ANTIFOAM ) PRODUCT DESCRIPTION FEATURES & BENEFITS</div>
<div id="cke_pastebin">
</div>
<div id="cke_pastebin">
<span style="color: rgb(0, 0, 0); font-family: Calibri, sans-serif; font-size: 14.6667px;">RXSOL-33-3325-230</span> is a ANTISCALANT & ANTIFOLUANT FOR MULTISTAGE FLASH DISTILLATION PLANTS : Premium product, a neutralized antiscalant/antifoulant for use in MSF units operating at high temperature.<br />
</div>
<div id="cke_pastebin">
RXSOL-16-2066-200 is a ANTIFOAM SEA WATER DISTILLATION : Highly effective antifoam for seawater distillation plants.</div>
